Rust Repairs and Welding for Streatham Cars

In Streatham most cars live on the street, and parking zones can make it awkward to leave one off the road for a day or two. Our workshop is about 20 minutes away in Hackbridge, and we can collect the car, repair the rust properly and bring it back.

  • ★★★★★ 4.9/5 from 193 Google reviews
  • ~20 min from Streatham
  • Mon–Fri 8am–8pm · Sat 8am–5pm
Car raised on the ramp for underbody inspection at KITH Cars Garage & Bodyworks, Hackbridge

Street-parked Streatham cars and how to get welding done easily

Around Streatham Common and the terraces off Streatham Common North, off-street parking is rare. Cars sit outside through every wet week and salty cold spell, and those that do mostly short stop-start trips along the A23 seldom get the underside properly dry. That combination is hard on sills, floors and rear arches. The first sign is often bubbling paint along a sill, or an MOT advisory that says corrosion without much detail. By then the metal inside the sill has usually been rusting for some time, because corrosion in a box section works outwards from within.

Lambeth has been extending controlled parking zones across Streatham, and that shapes how welding gets done. Larger jobs can take a day or more, and a car with a structural defect rated dangerous shouldn't be driven at all. Rather than juggling permits or risking the drive, collection and delivery is often the simpler answer, and we can arrange it. Otherwise the drive is straightforward: down Mitcham Lane past the Odeon side of the high road, though expect queues at the Figges Marsh signals.

Once the car is here, we get it on the ramp and probe every suspect area, then send you a written quote that sets out the structural items first. We cut back to sound metal, weld in new steel, and seam seal, prime and underbody coat the repair. Enclosed sections get cavity wax. If we cut into a sill and find more corrosion than expected, we stop and phone you before doing any more. We'll also check the brake and fuel lines near the repair, as they run close to the sills on many cars and suffer from the same salt.

Smaller city cars and older hatchbacks, common in the flat-heavy streets near the Tate Library, are often inexpensive to repair and well worth keeping on the road. Whatever the car, the welding is covered by our 12-month workmanship warranty.

Welding & Rust Repair: what’s involved

Most cars have a monocoque body, meaning the shell itself acts as the chassis. Sills, floor pans, crossmembers and the areas around suspension and seat belt mountings carry load, so rust there weakens the car. Corrosion usually starts where water and road salt collect: inside sills, behind arch liners, along seams and around jacking points, and it often works from the inside out.

The MOT treats corrosion seriously. Excessive corrosion in load-bearing structure is a failure, particularly within 30cm of prescribed areas such as suspension, steering and seat belt mounting points. A proper repair means cutting back to sound metal, fitting a new steel section and welding it in, then sealing and protecting it inside and out. Covering rust with filler or a plate over rotten metal doesn't fix it, and a tester can fail an inadequate repair on a structural area.

From £80Written quote first
2 hours – 3 daysTypical time in the workshop
3 monthsWorkmanship warranty
4.9★193 Google reviews

Signs of rust that needs welding

Bubbling paint on sills or arches

Rust forming underneath the paint. It's usually more extensive than the visible bubbles suggest.

Holes or flaking metal underneath

Floor pans, sills, jacking points and crossmembers that flake or can be pushed through with a probe.

MOT advisory or failure for corrosion

An advisory is a warning worth acting on; a failure for structural corrosion must be repaired before the car can pass.

Soft or crumbling jacking points

If the sill crushes or the jack sinks into it, the structure around it is weakened.

Rust around suspension mountings

Corrosion near spring seats, strut tops, subframe or trailing arm mounts is structural and needs prompt repair.

Water in the footwells

Can be caused by holes in the floor, although blocked drains and door seals are more common causes, so we check.

Rust on door bottoms and boot floor

Often cosmetic rather than structural, but cheapest to repair while the rusted area is still small.

When should it be done?

Deal with structural rust as soon as it's found, ideally before the MOT so you have time to plan. Corrosion advisories are worth acting on, because another winter of salted roads can turn an advisory into a failure needing bigger repairs. Cosmetic rust on door bottoms or arch edges isn't a safety issue, but it's cheapest to fix while it's still at the bubbling stage. Older and classic cars benefit from a regular underside inspection.

  • MOT advisory mentioning corrosion: before the next winter or MOT
  • MOT failure for corrosion: before retest, and before driving at all if the defect was rated dangerous
  • Bubbling paint on sills, arches or door bottoms: while the rust is still small
  • Buying an older or classic car: underside inspection before or soon after purchase

How we repair rust and welding

  1. Inspection on the rampWe examine the underside, probe suspect areas and read any MOT failure sheet, separating structural corrosion from cosmetic.
  2. Written quoteWe explain what's structural, what's cosmetic and what should be prioritised. Rust sometimes proves more extensive once cut into, and we'll contact you before doing anything extra.
  3. Access and protectionTrim, arch liners, seats or carpets are removed as needed, and fuel lines, brake pipes and wiring are protected or moved away from heat.
  4. Cut out corrosionRusted metal is cut back until we reach clean, sound steel.
  5. Fabricate or fit repair sectionsNew steel sections are formed in the workshop, or pre-formed repair panels are used where available and a good fit.
  6. Weld inThe new metal is MIG welded in, seam welded where the structure requires it, and the welds are dressed back.
  7. Seal and protectJoints are seam sealed and primed, the underside is coated with underbody protection and enclosed sections are treated with cavity wax.
  8. Refit, check and hand overEverything is refitted, pipes and wiring are checked, and we explain what was repaired and anything else worth watching.

Steel and materials

Repairs are made with new steel of a suitable thickness for the area, either fabricated in the workshop or using pre-formed repair panels where they're available and fit well. After welding, joints are sealed, primed and protected with underbody coating, and enclosed sections such as sills are treated with cavity wax, which creeps into seams to slow future corrosion from the inside.

  • New steel sheet of the appropriate thickness
  • Pre-formed sill and arch repair panels where suitable
  • Weld-through primer and anti-corrosion primer
  • Seam sealer
  • Underbody protection and cavity wax

How long it takes

2 hours – 3 days

A single small MOT repair can often be done in 2–4 hours. Sills, floor sections or several areas can take 1–3 days, and extensive work on older cars longer. If the rust turns out to be worse once cut out, we'll call you before going further.

What’s included

  • Underside inspection and written quote
  • Cutting out corrosion back to sound metal
  • New steel welded in
  • Seam sealing, priming and underbody protection on the repair
  • Cavity wax in enclosed sections that have been repaired
  • 12-month workmanship warranty

From Streatham to our Hackbridge workshop

From St Leonard's Church take Mitcham Lane (A216) south-west; it becomes Streatham Road and reaches the signalised Figges Marsh junction in Mitcham, where you turn left onto London Road (A217). Follow the A217 around Mitcham town centre's one-way system to the Cricket Green, take Cranmer Road (A239) to Carshalton Road (A237) and head south past Mitcham Junction; past Beddington Corner it becomes London Road into Hackbridge, where Soho Mills is near Hackbridge station.

Take Mitcham Lane (A216) to the Figges Marsh junction, the A217 round Mitcham to the Cricket Green, then Cranmer Road and Carshalton Road to Hackbridge, around 20 minutes. Collection from Streatham is available.

Directions from Streatham

About Streatham

Streatham is a large, busy south London district strung along the A23, the line of the old London to Brighton road, and is one of London's designated major town centres. It grew from a Georgian spa village into a Victorian and Edwardian suburb, and today mixes big period houses and mansion blocks around Streatham Hill and the Common with terraced streets in Streatham Vale and Streatham Park. It is popular with young families and professionals commuting into central London. Driving here is dominated by the long, slow A23 high road, with residential side streets increasingly shaped by parking zones and traffic filters.

Places nearby: Streatham Common, The Rookery, Norwood Grove, St Leonard's Church, Streatham Ice and Leisure Centre, Streatham Hill Theatre

Postcodes: SW16, SW2 · London Borough of Lambeth (with western fringes in Wandsworth)

More about KITH for Streatham drivers

Welding & Rust Repair in Streatham: your questions answered

Can you collect my car from Streatham for rust repairs?

Yes, collection and delivery can be arranged. It's useful if the car failed on a dangerous defect or if leaving it parked for days is difficult. We'll agree timings when you book.

The MOT just says corrosion. How do I know how bad it is?

The wording often doesn't tell you much. We put the car on the ramp, probe the area mentioned and the surrounding metal, and explain what we find. You'll then get a written quote showing what's structural.

Is welding a small older hatchback worth it?

Often, yes. Small cars usually have simpler sills and floors, so repairs can be quite reasonable. If the car is otherwise sound, it's usually better value than replacing it.

Will my car pass the MOT after welding?

We repair the items on your failure sheet to a standard that meets the MOT inspection requirements, although the tester makes the final decision at the retest. If we find other corrosion nearby that's likely to cause a problem, we'll point it out before the retest.

Is it worth welding an older car?

It depends on how much rust there is and what the car is worth. A couple of sill repairs on an otherwise sound car are usually worthwhile. Widespread corrosion across floors, sills and mountings can cost more than the car is worth, and we'll give you an honest view.

Can you just patch over the rust?

Not on structural areas. Welding a plate over rotten metal traps moisture so the rust carries on underneath, and a tester can fail it as an inadequate repair. We cut out to sound metal and weld in new steel.

What's the difference between structural and cosmetic rust?

Structural rust affects load-bearing parts such as sills, floors, crossmembers, chassis legs and the areas around suspension and seat belt mountings. Cosmetic rust is on outer panels like door skins and bolt-on wings, which aren't load-bearing and usually only fail an MOT if they leave sharp edges.

How can I slow down rust?

Rinse the underside during winter to remove road salt, keep door and sill drain holes clear, and deal with stone chips early. On older cars, cavity wax in the sills and underbody protection make a real difference, and we can apply them.

Price your welding and rust repair now

Enter your reg and we’ll look up your car and price the job from our own labour rates and the book time for your model. Then book it in with a fixed written quote before any work starts.

  • Free, about 30 seconds, no sign-up
  • Parts, labour and VAT included
  • 12-month workmanship warranty
  • Collection from Streatham can be arranged
“It’s rare to find a garage you can truly trust. Fair price, brilliant customer service.”Thinushan K. · ★★★★★ Google

Prefer to talk? Call 020 4629 9469 or WhatsApp us.

Loading instant quote…
Chat on WhatsApp