How we handle van servicing at Hackbridge
The first question at the desk is what the van actually does. A long-wheelbase van running motorway deliveries and a small one doing twelve drops a day in Croydon wear out in completely different places, and the second is the reason we ask whether the schedule the dash is counting down to really suits it. We also ask for the van empty if you can manage it, or at least to know what is in the back, because a loaded van cannot be raised safely and weight on the rear axle hides the play we are looking for in springs, bushes and bearings.
On the ramp the attention goes to the back end. Rear drums come off rather than being judged through the inspection hole, because shoes wear unevenly on a van that spends its life loaded, and a seized adjuster or a weeping wheel cylinder is both common and cheap to catch early. Tyres are checked against the plate for load rating as well as tread. On diesels we read soot loading and the history since the last completed regeneration along with the AdBlue system status, and we read the pattern rather than just the warning light. Sliding door rollers, hinges and locks are checked and lubricated while it is up.
What comes back to you is a list in three parts: done, needed before the van goes out again, and due by the next service. The third group is the useful one, because it lets you book the downtime instead of having it chosen for you. We will not force a regeneration purely to put a light out without establishing why the filter filled, and we will not sign off a service using an oil that does not carry the maker's approval, whatever happens to be on the shelf. Anything beyond the quoted service is priced and agreed on the phone before it happens.

