How we handle suspension repair at Hackbridge
Every suspension job here starts with the wheels off the ground and a second pair of hands. One of us levers each joint while the other watches and listens, because a worn bush moves under load and looks perfectly healthy standing still. We work round the corner in the same order every time: top mount, spring, damper body, ball joint, arm bushes, drop link, anti-roll bar mounts, then the steering joints, so nothing gets missed because the obvious fault turned up first. If a noise only appears on the move, we will take you out in the car and ask you to point at it.
What you get shown is the play itself. We would rather you stood by the ramp and watched the joint move than took our word for it, and if a part is borderline we say so and leave the decision with you. Corroded fixings are part of the job in London: subframe bolts, drop link nuts and strut top nuts sit in road salt for years and some of them will shear. We tell you that before we start rather than afterwards, and if a bolt does snap we stop, call you with what it will take to put right, and wait.
A knock does not get quietened here by nipping up a worn joint or packing out a perished bush, because that comes back within weeks and you pay twice. Coil springs are never cut or heated to lower a car either, and we will talk you out of lowering springs on standard dampers, since the damper is not valved for the shorter travel and will not survive it. Prices are agreed part by part before any work starts, split into what needs doing now and what can safely wait until the next service, so you can spread the cost if you need to.

