How we handle tyre fitting at Hackbridge
The bay work matters more than people expect. Alloys are mounted with the rim protected and the bead broken clear of the sensor, and before the new tyre goes on we take a wire cup to the bead seat, which is where corrosion builds up under the old tyre and causes the slow leaks that never show as a puncture. Rims are checked for buckles, cracks and heat marking at the same time. Locking nut keys get checked at booking in, because a rounded key is much better discovered in the reception than with the car on the ramp.
Every tyre leaves with a new valve, or a service kit where the valve is part of a pressure sensor, because a rubber valve perishes at the base with age and will let a new tyre down inside a season. Wheels are balanced on the machine and weighted to suit the rim, with adhesive weights set inside the spokes on alloys rather than clip-ons hammered onto the lip. Directional and asymmetric patterns are checked against the sidewall marking before inflation, nuts go on with a torque wrench, and pressures are set to the plate on the door shut or filler flap.
Part-worn tyres are not fitted here at any price, and no car leaves on a lower speed or load rating than its door placard asks for. A wheel with a visible belt bulge or a buckled rim does not get weights hung on it either, because the vibration in that case is a symptom and not the fault. Prices are agreed before anything is ordered: three options by size, the £20 a tyre fitting with balancing and a new valve included, and a TPMS service kit priced separately where the wheels carry sensors. If your size has to come in, we tell you the day it lands when you book.

